CIRCULAR SAW BLADE FOR ALUMINIUM PROFILES WITH 450 MM EVO SAW A450

‹ ›

Circular Saw Blade for Aluminium Profiles with Ø 450 mm and Negatively Set Teeth EVO SAW A450

Industrial precision for aluminium, aluminium profiles and solid material with a consistently clean cutting pattern

In industrial aluminium processing, productivity and quality are determined not only by the machine, but above all by the tool. A high-performance circular saw blade for aluminium must run smoothly even at high volumes, cut with low burr formation and repeat exactly what was set once over long shifts. The EVOMATEC EVO SAW A450 was developed precisely for these requirements in daily series production. The circular saw blade for aluminium profiles EVO SAW A450 operates with a diameter of Ø 450 mm and a tooth geometry that is deliberately designed for stable, controlled material engagement. This produces clean cutting edges, precise lengths and a uniform cutting pattern, even with demanding profile cross-sections and changing material thicknesses.

Smooth running and controlled cutting for aluminium profiles and solid cross-sections

When cutting, aluminium reacts sensitively to vibrations, incorrect tooth geometry or unstable conditions. The EVO SAW A450 is therefore designed to keep the cutting process stable and ensure controlled material removal. Especially when machining aluminium profiles, visible surfaces and precisely fitting system components, this smooth cut is a decisive advantage. Particularly with thin-walled profiles, high daily volumes or frequently changing profile geometries, the coordinated combination of blade design and tooth geometry ensures that the cutting edge remains clean, burr is reduced and dimensional accuracy stays stable over many cycles.

Stability as the basis for repeat accuracy in series production

Why precision always starts with stability

A precise cut is not created by coincidence, but by stability in the process. The EVO SAW A450 was developed for production environments in which cutting quality must remain consistently stable over time. The key factor is that the circular saw blade runs smoothly even under high load and reliably implements the cutting parameters. In practice, this means: uniform cutting edges, reproducible mitres and a level of precision that becomes clearly noticeable in daily operation. When lengths, angles and fits remain correct over long production runs, scrap decreases, assembly becomes faster and quality control becomes easier.

Long tool life for operations with consistently high throughput

Fewer tool changes, more production, less downtime

In companies cutting high volumes of aluminium profiles every day, tool life and process smoothness matter. The EVO SAW A450 is designed for long service life so that production flow is not slowed down by frequent tool changes. Anyone working in continuous operation recognises the benefit immediately: fewer interruptions, fewer resharpening cycles and a cutting quality that remains stable for significantly longer runtime. Many users experience exactly this effect in everyday use: while conventional circular saw blades decline after a short time or require resharpening, the cutting pattern of the EVO SAW A450 stays clean and controlled for longer. This not only reduces tool costs per cut, but also increases overall line productivity.

Optimised for profiles, solid material and massive aluminium cross-sections

For aluminium solid profiles and bar stock with consistently high quality

The EVO SAW A450 is not only designed for classic profile geometries, but also for applications where solid material is the focus. In many operations, aluminium solid profiles and various types of bar stock are processed in addition to profiles. This is exactly where stable tooth geometry and smooth blade running show their strengths. Typical applications include, among others: aluminium solid profile and massive aluminium profile aluminium solid material profile for precise cutting aluminium solid bar for series cutting aluminium flat bar for structural components aluminium square bar for frame and connecting elements aluminium round bar for industrial components Thanks to controlled engagement, the cut is guided cleanly, the surface remains low-burr and the material is separated reliably, even with thicker cross-sections and higher cutting resistance.

Why negatively set teeth are so important for aluminium

More process reliability, less grabbing, better surfaces

In aluminium cutting, the correct tooth angle is crucial. A negative tooth angle ensures smooth engagement into the material and reduces the tendency of the tool to grab aggressively. This stabilises the cut, lowers vibration and supports a clean cutting pattern, especially on sensitive surfaces and thin-walled profiles. The result is a surface that in many cases requires less rework, while dimensional accuracy remains noticeably more stable in series processes.

Developed for companies with high daily output

The EVO SAW A450 is designed for operations that do not cut occasionally, but work at high throughput every day. In this environment, downtime, dimensional deviations and unplanned tool changes are direct cost factors. EVOMATEC therefore focuses on a solution that works reliably in the background and delivers consistently. Anyone working in window manufacturing, door production, façade construction or industrial aluminium production benefits in daily operation from: stable cutting processes with reproducible results fewer interruptions thanks to longer tool life clean cutting edges for faster downstream processing higher output per shift due to fewer tool changes

Key technical data at a glance

Circular saw blade specification

Blade diameter: Ø 450 mm Tooth geometry: negatively set, optimised for aluminium Application: aluminium, aluminium profiles, solid material, series cutting Operational advantage: smoother processes, less downtime, consistent cutting quality

Conclusion

The EVOMATEC circular saw blade EVO SAW A450 for aluminium and aluminium profiles with Ø 450 mm stands for industrial cutting quality, long tool life and reliable process stability. The coordinated geometry ensures controlled cutting, smooth running and consistently clean results, even with demanding profiles and solid material. This solution is aimed at companies that cut high volumes every day and require consistently precise dimensional accuracy. For modern production lines, the EVO SAW A450 is a tool that visibly improves productivity and quality. EVOMATEC – Machines and tools for precise aluminium profile machining.

EVOMATEC – Circular saw blades for precise aluminium profile machining.
Request technical consultation:Click here