AUTOMATIC MITRE SAW FOR ALUMINIUM PROFILES EVOM II 700

‹ ›

EVOM II 700 Automatic Mitre Saw for Aluminium Profiles

Hydro-pneumatic profile mitre saw with Ø 700 mm saw blade for precise cutting and cost-effective series production

The EVOM II 700 is a robust automatic saw for aluminium and a powerful automatic saw for aluminium for precision cutting in window, door, and façade manufacturing. As an automatic saw for aluminium profiles, it is designed for process-reliable cuts, clean surfaces, and high repeat accuracy. In daily production, it is used depending on the application as a saw for aluminium, as a classic mitre saw, or as a specialized profile mitre saw when profile cross-sections must be separated reliably, quickly, and in a standardized way.

For many companies, the investment decision is not only about technology, but also about profitability. Anyone looking for an aluminium mitre saw with the best price or an aluminium mitre saw with the lowest price expects a machine that runs stably in everyday use, causes little setup time, and is productive immediately. This is exactly what the EVOM II 700 stands for with a convincing price-performance ratio combining cut quality, standard equipment, and practical operation. As an automatic mitre saw, it supports fast workflows and clear processes, without quality depending on the individual operator.

Automatic mitre saw for aluminium with a wide angle range

The EVOM II 700 is an automatic mitre saw for aluminium profiles that covers fixed detent angles for typical construction tasks. Possible mitre cuts are at -75, -67.5, -45, -30, -22.5, -15, 0, 15, 22.5, 30, 45, 67.5, and 75 degrees. This makes it an aluminium mitre saw ideal for frame and sash profiles, stick curtain wall elements, and project-specific geometries in façade manufacturing.

The cutting capacity depends on the angle and is shown transparently via the capacity diagram. Combined with the large blade diameter, this results in a practical design for demanding cross-sections, because the Ø 700 mm saw blade is designed for stable cutting conditions in profile processing. In this way, the machine meets exactly the requirements that many users place on a mitre saw with Ø 700 mm saw blade, including a clearly calculable Ø 700 mm saw blade cutting capacity for series and project production.

Cutting process, cutting speed, and safety

At the heart of the machine is a controlled hydro-pneumatic cutting process for aluminium, which supports a uniform feed and therefore promotes a consistent cut surface. The cutting speed can be adjusted depending on the profile, which makes process-reliable production easier, especially with different wall thicknesses and profile geometries. This positions the EVOM II 700 not only as an aluminium mitre saw, but as a consistently production-oriented solution for precise and repeatable cutting.

For operational safety, the machine is equipped with a guard hood including a safety sensor. Profile clamping is carried out via pneumatic vertical and horizontal clamps, so the cutting operation remains stable and repeatable. This makes the EVOM II 700, as a mitre saw for aluminium profiles, designed for safe, series-capable use.

Equipment for productive cutting

The standard equipment includes a high-performance Ø 700 mm saw blade, which in practice provides the basis for stable cuts and high repeat accuracy. For material flow, a right infeed conveyor is integrated, allowing profiles to be fed in a controlled way and production workflows to be standardized. In addition, the machine has an integrated cooling system. In production, this combination is often described as a saw blade cooling system, because it thermally supports the cutting zone and the tool and thus improves process stability during cutting.

As an automatic saw for aluminium, the EVOM II 700 is equipped so that it can be integrated directly into many production processes without additional retrofitting. The model name EVOM II 700 stands for a consistently economical design when an automatic mitre saw is required that works reliably in both series production and project work.

EVOM II 700 as an automatic aluminium profile mitre saw with a focus on profitability

Anyone selecting an automatic aluminium profile mitre saw usually focuses on three points: stable cut quality, safe operation, and an investment that pays back quickly. The EVOM II 700 combines these requirements in a clear machine logic designed for series-capable process reliability. This makes it a suitable solution for companies looking for an automatic saw for aluminium profiles with a convincing price-performance ratio, while also valuing defined angles, controlled feed, and productive standard equipment.

Technical Data EVOM II 700